The Clipsal 31LCDA load correction device is designed to improve the dimming performance for most dimmable LEDs/CFLs. The device is suitable for use with Clipsal and Schneider Electric 2-wire, mains-powered dimmers that use phase-controlled (LE, TE or Universal) dimming. It is not used with 3-wire dimming units.
The device provides improved dimming performance and load stability for low-power dimmable CFL or LED lighting loads across a wide dimming range. It also provides a positive off-state for phase-controlled dimmer channels controlling electronic lighting loads and is designed to reduce flicker with dimmable LED lights.
The device is designed for dimmers connected to 220-240 VAC, 50 Hz mains voltages and has two non-polarised fly leads with stranded conductors. It must be installed in a containment box (for residential installations) or inside a service panel box (for DIN rail dimmer applications).
Clik here to view.
Image may be NSFW.Clik here to view.
Image may be NSFW.Clik here to view.
Clik here to view.
