The Weidmüller A-series PUSH IN terminals are designed to reduce connection times for both solid conductors and conductors with crimped-on wire-end ferrules. The conductor is inserted into the contact point as far as the stop, creating a gas-tight connection. Stranded-wire conductors can also be connected without the need for special tools.
The product is available as a 2-, 3- or 4-connection terminal, with matching feed-through, test-disconnect and ground terminals. Conductors with cross-sections ranging from 1.5 to 10 mm2 can be connected. Flexible potential distribution can be made with the cross-connection facility, and faster maintenance is possible with available test points supported by an identification marker system.